Gigabyte GA-X99-SOC Champion User Manual page 24

OC Trigger switch (TGR):
This switch allows the overclockers to jump between low and extremely high frequencies in an instant. After remaining at a
low frequency during system boot and OS optimization, the overclocker can then engage the Trigger Switch to instantly hit the
target frequency, save their score submission, grab a screen shot, and watch the records tumble.
Before using the overclocking buttons, make sure to load the optimized defaults in BIOS Setup to return
the BIOS settings to factory defaults.
1 2 3
CPU Mode Switch:
This switch allows the overclockers to switch between CPU default mode and OC mode.
1 2 3
1
1
1 2 3
1 2 3
1
Hardware Installation
1
1
1: Target frequency set in BIOS Setup or other overclocking application.
2
TGR
1
2: Safe frequency (using the lowest CPU ratio, which may vary by CPU)
2
1
1: Default
2
1 2: O C Mode. (Please note that using this mode may result in in-
compatibility.)
2
CPU Mode Switch
- 24 -