Gigabyte GA-X99-SOC Champion User Manual page 107

AutoGreen
AutoGreen is an easy-to-use tool that provides users with simple options to enable system power savings via a
Bluetooth-enabled smart phone/tablet device. When the device is out of the range of the computer's Bluetooth
receiver, the system will enter the specified power saving mode. Before using this app, you need to turn on
Bluetooth on both your computer and smart phone/tablet device.
The AutoGreen Interface
Bluetooth Devices Tab:
The Bluetooth tab allows you to pair your smart phone/tablet device with the Bluetooth receiver on your computer.
Press Refresh to let AutoGreen search for the Bluetooth devices around you. From the displayed list, select
your smart phone/tablet device and a message which says "Tap to set up your.." will appear. Click to confirm.
A message will appear on both your computer and smart phone/tablet device prompting you to compare the
passcodes on the two devices. Confirm to complete the pairing.process.
• Device Scan Time:
Set the length of time that AutoGreen will search for your smart phone/tablet device, ranging from 2 to 30
seconds.
• Rescan Times:
Set how many times AutoGreen will search for your smart phone/tablet device if it does not detect it, ranging
from 2 to 10 times. If the device is still not detected, the system will enter the selected power saving mode.
Control Tab:
The Control tab allows you to select a system power saving mode.
Button Description
Standby Enters Power on Suspend mode
Suspend Enters Suspend to RAM mode
Hibernate Enters Suspend to Disk mode
Disable Disables this function
User Account Tab:
On the User Account tab, you can enter your Windows user account password and confirm. Later, when you
awaken your system from Suspend/Hibernate mode you can enter Windows directly without entering the user
account password.
(Note) Once your smart phone/tablet device has been paired with your AutoGreen-enabled computer, you'll
not be able to use it to connect to other Bluetooth device(s).
- 107 - Unique Features