Factory Reset Button - NETGEAR Powerline PL1200 Quick Start Manual

Power LED
Ethernet LED
Pick A Plug LED
Factory Reset
button
Solid green. The electrical power is on.
Blinking amber. The adapter is in power saving mode.
Blinking green. The adapter is in the process of setting up
security.
Off. The adapter is not receiving electrical power.
Solid. The Ethernet port is linked.
Off. No Ethernet connection is detected.
The Pick A Plug feature lets you pick the electrical outlet
with the strongest link performance, indicated by the color
displayed by the LED:
Red. Link rate < 50 Mbps (good).
Amber. Link rate > 50 and < 80 Mbps (better).
Green. Link rate > 80 Mbps (best).
Off. The adapter did not find any other compatible Powerline
devices using the same encryption key.
Press the Factory Reset button for one second, then release
it to return the Powerline adapter to its factory default
settings.
5