Parrot CK3100 Series Installation Manual page 8

BOXER
2
Feed the cable below the
heating support by lifting it up
using a plastic trim tool.
(Making sure that you DO NOT
cut the screen cable.)
4
Then fit the screen.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Fitting the hands-free system 2 / 2
!
207
Before sliding the radio back in,
stick the support provided to the
top left-hand corner of the
heating panel after having
thoroughly cleaned the surface.
(Making sure that you cut the
cable when clipping the radio in
place.)
3