Table of Contents
Advertisement
|tjXW^Xhhi†~†Œ•ŽU”GGwˆŽŒG`GG{œ™š‹ˆ SGh—™“G_SGYWW[GGYaX^Gwt
Operation
Setting Cooking Times & Power Levels
Your microwave allows you to set up to two different stages of cooking,
each with its own time length and power level. The power level button
lets you control the heating intensity from Warm (1) to High (0).
One-stage Cooking
For simple one-stage cooking, you only need to set a cooking time. The
power level is automatically set to High. If you want to set the power to
any other level, you must set it using the Power Level button.
1
Use the number buttons to set a cooking time. You can set a time
from one second to 99 minutes, 99 seconds. To set a time over one
minute, enter the seconds too. For example, to set 20 minutes,
enter 2, 0, 0, 0 .
2
If you want to set the power level to something other than High,
press the Power Level button, then use the number buttons to
enter a power level.
Power Levels:
1 = PL:10 (Warm)
6 = PL:60 (Simmer)
2 = PL:20 (Low)
7 = PL:70 (Medium High)
3 = PL:30 (Defrost)
8 = PL:80 (Reheat)
4 = PL:40 (Medium Low)
9 = PL:90 (Sauté)
5 = PL:50 (Medium)
0 = PL:Hi (High)
3
Press the Start button to begin cooking. If you want to change the
power level, press Pause/Cancel before you press Start, and re-
enter all of the instructions.
Some recipes require different stages of cooking at different
temperatures. You can set multiple stages of cooking with your
microwave.
Multi-stage Cooking
1
Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page.
When entering more than one cooking stage, the Power Level
button must be pressed before the second cooking stage can be
entered.
To set the power level at High for a stage of cooking, press the
Power Level button twice.
2
Use the number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to set
the power level of the second stage of cooking.
4
Press Start to begin cooking.
You can check the Power Level while cooking is in progress by
pressing the Power Level button.
Using the More/Less Buttons
The More/Less buttons allow you to adjust pre-set cooking times. They
only work in the Instant, Time Cook modes. Use the More/Less button
only after you have already begun cooking with one of these
procedures.
1
To ADD more time to an automatic cooking procedure: Press the
More (9) button.
2
To REDUCE the time of an automatic cooking procedure: Press the
Less (1) button.
If you wish to increase/decrease in Time Cook mode by 10 sec, press
the More (9) or Less (1) button.
9
Advertisement
Table of Contents
