Table of Contents
Advertisement
Installation-Lock/Unlock Car Door
1) Before installation, please open card door, check
central lock, and use origin car remote to check
which line is to lock the door, which line is to unlock
the door.
2)Connect tracker I/O cable (output 5,yellow) to
central lock control line ( lock);Connect tracker I/O
cable (output 4, yellow) to central lock contral line
(unlock)
Installation-Fuel Monitoringn (option)
Connect fuel sensor, get to know fuel consumption per day.
1) fuel sensor installtion
a. Pour oil from the tank and clear the residual oil
b. Select predrill point on the top of fuel tank;
c. Drill fixed point at the predrill point by tapper, and then start drilling; When it is done,select small drill
according to gasket of sensor and drill fixed holes to fix the fuel sensor;
d. Install fuel sensor to the fuel tank and fix it by screwer, fuel sensor installation complete.
2). Diagram
a. Connect black cable of fuel sensor to AD
cable (blue) of tracker.
b. Connect red cable of sensor to power cable
(red, positive) of car, connect blue cable of
sensor to power cable (negative,black) of car
For more info about fuel sensor, please contact with us
Tips on installation--suggested places for antennas
You can put GPS/GSM antennas to the places in the car, do not cover it with metal things.
ONER GPS Vehicle Tracker
User Manual
.
Operation & Installation
7
Advertisement
Table of Contents
