Combustion Air Adapter Burner Connection - Viessmann Vitocrossal 200 Installation Instructions Manual
Gas condensing boiler with cylinder burner
Hide thumbs
Also See for Vitocrossal 200:
- Service instructions manual (96 pages) ,
- Service instructions for contractors (88 pages) ,
- Instructions manual (72 pages)
Table of Contents
Advertisement
Vitocrossal 200 CM2 186 to 311 Installation
Combustion Air Adapter Burner Connection
For CM2 boiler model 186 only
For CM2 boiler model 246 and 311 only
1. Install the combustion air intake adaptor to the burner
air inlet using four M6 x 20 bolts, nuts and washers
Connect the combustion air flex hose to the burner
flange adaptor and secure with retaining clamp.
1. Install the combustion air intake adaptor to the burner
air inlet using six M4 x 10 bolts, nuts and washers.
Connect the combustion air flex hose to the burner
flange adaptor and secure with retaining clamp.
Boiler
17
Advertisement
Table of Contents
