Dodge 2014 Dart Owner's Manual page 146

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the button until you hear a single beep,
indicating that the active and hold status of the two
calls have switched. Only one call can be placed on
hold at a time.
Conference Call
When two calls are in progress (one active and one on hold),
press and hold the button until you hear a double
beep indicating that the two calls have been joined
into one conference call.
Three-Way Calling
To initiate three-way calling, press the
call is in progress, and make a second phone call, as
described under "Making a Second Call While Cur-
rent Call is in Progress." After the second call has
established, press and hold the
hear a double beep, indicating that the two calls have
been joined into one conference call.
Call Termination
To end a call in progress, momentarily press the
ton. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active
call. If the active call is terminated by the phone far
end, a call on hold may not become active automati-
cally. This is cell phone-dependent. To bring the call
back from hold, press and hold the
hear a single beep.
Redial
• Press the
• After the "Ready" prompt and the following beep, say
button while a
"Redial."
• The Uconnect® Phone will call the last number that
was dialed from your mobile phone.
button until you
button to begin.
but-
button until you