E Thernet - Yealink SIP-T22 User Manual

To select the IP phone as your primary device:
1. In your Lync client, click the audio device icon, as shown below.
2. Select Yealink T22 Phone as your primary device.
After finishing the above steps, you can use BToE feature.
Note
If Yealink T22 Phone is not selected as your primary device, you will not be able to use
BToE feature, and calls made on the Lync client will not be displayed on the phone.
This section provides information on how to use BToE on your phone and Lync client.
BToE enables you to communicate with Lync contacts using your Lync client while
providing you with quality audio through your phone. After BToE is enabled, you can
answer, place, hold and resume calls with your Lync contacts on your phone and the
Lync client on your PC/PAD simultaneously.
To place a call:
Do one of the following:
Select a contact or enter the phone number, and then press the Call soft key on
-
Better Together over Ethernet
79