E Thernet - Yealink SIP-T22 User Manual

To Set up the Yealink BToE connector:
Right-click , you can do the following:
Click Show/Hide(S), the Yealink BToE Connector interface will be shown or hidden.

Click Pair & Sign in(G), you can pair your phone with your Lync client.

Click Settings(P), you can set up the Yealink BToE Connector, and then click OK to

save.
Click About(A), you can view the information of Yealink BToE Connector.

Click Exit(E), you can close the software.

Before you can use BToE, you need to pair your phone with your Lync client to enable
BToE. This section provides information on how to pair your phone with your Lync client.
Paired Status
After a Lync user signs in to Lync server on your Lync client, you can pair your phone with
your Lync client to enable BToE. Before you pair your phone with the Lync client, you
need to be familiar with the following paired status:
Better Together over Ethernet
75