Manual Setup - Marantz SR6010 Owner's Manual

Contents Connections

Manual Setup

Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you change the speaker settings after performing Audyssey
0
you will no longer be able to select Audyssey MultEQ
Dynamic EQ or Audyssey Dynamic Volume
®
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
Front panel Display
Playback
Setup,
®
XT32, Audyssey
®
. (v p. 180)
®
216
Rear panel
Settings Tips
Setting to use the 7-channel power
0
amplifier within this unit and an
external power amplifier connected to
PRE OUT connector to play back up to
9.1-channels.
9.1ch : You can connect speakers for up to
0
13.1-channels for MAIN ZONE.
Speakers to output audio are
automatically switched for playing back
up to 9.1-channels in accordance with
the input signal and sound mode.
Settings to assign all power amplifier
0
within this unit to MAIN ZONE to play
back up to 7.1-channels.
You can connect speakers for up to
0
7.1ch : 11.1-channels for MAIN ZONE.
Speakers to output audio are
automatically switched for playing back
up to 7.1-channels in accordance with
the input signal and sound mode.
Remote Index
Appendix