Intermec EasyCoder 201 II Installation Instructions page 3

EasyCoder 201 II – Installation Instructions
LABEL-TAKEN SENSOR KIT, cont'd.
Step-by-Step Installation
Instructions
Turn off the power and remove the power cord.
Disconnect all communication cables.
Open the right-hand door.
Loosen the two screws that lock the cover.
Pull the cover straight back and remove it completely.
Screws (2x)
Open the left-hand door.
Loosen the three screws that hold the CPU board assy. and swing
the unit outwards as illustrated.
Screws (2x)
Cover
Screw (1x)
CPU Board Assy.
Continued!
2