:KHQWKHFDUGLVILUPO\VHDWHGLQWKHFRQQHFWRUVHFXUHWKHFDUG
PRXQWLQJEUDFNHWZLWKWKHVFUHZ\RXUHPRYHGLQVWHS
Make sure the front of the card-edge connector is completely seated in the
expansion-card connector. The bottom of the card-mounting bracket must be
inside the card-slot opening, and the top of the bracket must be flush against
the chassis with the notch aligned with the screw hole in the chassis (see
Figure 2-8). "Expansion Cards" in Chapter 6 provides more information on cor-
rectly seating an expansion card.
front of
card-edge
connector
expansion-card connector
)LJXUH&RUUHFWO\,QVWDOOHG([SDQVLRQ&DUG
&RQQHFWDQ\FDEOHVUHTXLUHGIRUWKHFDUGDVGHVFULEHGLQWKHGRFXPHQ
WDWLRQWKDWFDPHZLWKWKHFDUG
5HSODFHWKHFRPSXWHUFRYHUUHFRQQHFW\RXUFRPSXWHUDQGGHYLFHVWR
WKHLUSRZHUVRXUFHVDQGWXUQWKHPRQ
Refer to the documentation that came with the expansion card for information on
installing any required drivers for your operating system.
5HPRYLQJ([SDQVLRQ&DUGV
To remove an expansion card, follow these steps:
5HPRYHWKHFRPSXWHUFRYHUDFFRUGLQJWRWKHLQVWUXFWLRQVLQ´5HPRYLQJ
DQG5HSODFLQJWKH&RPSXWHU&RYHUµIRXQGHDUOLHULQWKLVFKDSWHU
,IQHFHVVDU\GLVFRQQHFWDQ\FDEOHVFRQQHFWHGWRWKHFDUG
5HPRYHWKHVFUHZIURPWKHFDUGPRXQWLQJEUDFNHW
expansion card
Installing Upgrades on the System Board
card-mounting
bracket
2-13