Options; Before First Use - Zanussi ZDF11001WA User Manual

Options

Half-load
Activate or deactivate this option before
the start of a programme. You cannot acti-
vate or deactivate this option while a pro-
gramme operates.
Set this option when you want to wash a small
quantity of tableware and cookware. This option

Before first use

1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Make sure that the programme marker on
the knob is aligned with
www.zanussi.com
Water hardness
French mmol/l
degrees
(°fH)
84 - 90 8.4. - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
.
decreases the programme duration and the
consumption of energy and water.
Load the upper basket and the lower basket
and decrease the quantity of detergent.
This option is not applicable to
.
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
2. Press and hold
the knob counterclockwise until the pro-
gramme marker is aligned with
3. Release
when
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
2)
1
. At the same time turn
.
and start to flash.
and
5