Making Long Coffee; Making Long Coffee Using Pre-Ground Coffee; Customising The "My Long Coffee" Quantity; Delivering Hot Water And Steam - DeLonghi ESAM6900 User Manual

2. Place a cup or other recipient under the frothed milk
spout.
3. Turn the froth adjustment dial to CLEAN (fig. 33): ): the
operation is shown on the display (fig. 34) and stops
automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the steam
nozzle with a sponge (fig. 35).
Please note!
container after you have prepared the last drink only.
heat up.

MAKING LONG COFFEE

1. Choose the length and taste required, following the same
procedure as for espresso coffee.
Corresponding
coffee
My coffee
Short
Standard
Long
Extra long
2. Press the LONG icon (fig. 36).
3. The appliance starts making coffee. An image
corresponding to the type of drink chosen is displayed
together with a progress bar which fills as preparation
proceeds.
Please note!
To interrupt delivery, press the LONG icon or the STOP icon.

Making LONG coffee using pre-ground coffee

1. Select the pre-ground coffee symbol, as explained in the
espresso section.
2. Push the LONG icon (fig. 36).
3. The appliance starts making coffee. An image
corresponding to the preparation chosen is displayed
together with a progress bar which fills as preparation
proceeds.

Customising the "My LONG coffee" quantity

The appliance is set by default to automatically
deliver 100 ml of "My coffee". To modify these
settings, proceed as follows:
2. Press the
3. Press the LONG icon. The machine starts delivering
4. Press the PROG icon. The appliance starts programming;
5. As soon as the coffee in the cup reaches the required level,
The quantity set has now been programmed.

DELIVERING HOT WATER AND STEAM

LONG (ml)
Do not leave the appliance unattended while delivering hot
100 (pro-
water or steam. The spout becomes hot during delivery. Hold
gram. from 20
by the handle only.
to 250)
125
If Energy Saving is active, you may have to wait a few seconds
175
before hot water and steam are delivered.
210

Delivering hot water

250
1. Check that the hot water spout is attached correctly.
2. Place a container under the water spout (as close as
3
4. Hot water delivery begins and then stops automatically.

Change the quantity of water delivered automatically.

The machine is set by default to automatically delivery 250 ml
of hot water. To modify these quantities, proceed as follows:
1. Check that the hot water spout is attached correctly.
2. Position a container under the spout.
3. Press the
4. When the hot water in the cup reaches the required level,
16
spouts (fig. 9).
icon repeatedly (fig. 8)until "My
coffee" is displayed.
coffee;
press the STOP icon again.
Please note!
EXIT PROG icon.
"My LONG coffee" can be customised in all profiles (see
"Memorising your personal profile" on page 17).
Important! Danger of burns.
Please note!
possible to avoid splashes) (fig. 4).
Press the icon (fig. 37).
A progress bar fills gradually as preparation proceeds. To
interrupt delivery of the hot water manually, press the
STOP icon again.
Please note!
The quantity of hot water can be customised in all
profiles (see "Memorising your personal profile" on page
17).
icon, then the PROG icon.
press the STOP icon.