TLS CA Cert
TLS CA List
SIP
S ETTINGS/NAT
External IP A ddress
External Host
External Refresh
External TCP Port
External TLS Port
Local Network A ddress
SIP
S ETTINGS/TOS
ToS For SIP
Firmware Version 1.0.9.26
contains private key for client and signed certificate for the server. This file
will be renamed as "TLS.pem" automatically.
Note:
The size of the uploaded certificate file must be under 2MB.
This file must be named with the CA subject name hash value. It contains
CA's (Certificate Authority) public key, which is used to verify the
accessed servers.
Note:
The size of the uploaded CA certificate file must be under 2MB.
Display a list of files under the CA Cert directory.
Table 89: SIP Settings/NAT
Configure a static address and port (optional) that will be used in
outbound SIP messages if the UCM6100 is behind NAT. If it's a
hostname, it will only be looked up once.
Specify an external host name, which is similar to External Address
except the host name will be looked up periodically based on the
"External Refresh" interval.
Configure the refresh interval for the external host (if used) The default
setting is 10.
Configure the externally mapped TCP port when the UCM6100 is behind
a static NAT or PAT.
Configures the externally mapped TLS port when UCM6100 is behind a
static NAT or PAT.
Specify a list of network addresses that are considered inside of the NAT
network. Multiple entries are allowed. If not configured, the external IP
address will not be set correctly.
A sample configuration could be as follows:
192.168.0.0/16
Table 90: SIP Settings/ToS
Configure the Type of Service for SIP packets. The default setting is
UCM6100 Series IP PBX User Manual
Page 261 of 304