Alcatel-Lucent 400 DECT Localisation And Notification Management
Hide thumbs
Also See for 400 DECT:
- Manual (147 pages) ,
- Localisation and notification management (5 pages) ,
- User manual (65 pages)
Related Manuals for Alcatel-Lucent 400 DECT
Summary of Contents for Alcatel-Lucent 400 DECT
- Page 1 Alcatel-Lucent 400 DECT Handset Localisation and notification management Configuration documentation 8AL90838USAA ed.02 12/2011...
-
Page 2: Table Of Contents
Contents Configuration documentation ... . . p. 3 Introduction ........p. 3 Access to the configuration menu . -
Page 3: Configuration Documentation
Configuration documentation Other Introduction The Alcatel-Lucent 400 DECT handset provides services such as live signals, notification and events calls, and status calls. Only notification and event calls can be initiated by the user. Live signals and status calls are transparent to the user as these calls are automatically made by the handset. -
Page 4: How To Program Live Calls
Configuration documentation Edit notify screen You can only access this screen if the handset has been previously registered to the selected system • Status: allows the administrator to activate or deactivate the live signal, notification, key events and status features. •... - Page 5 Configure Live delay Edit notify Live delay Enter the time delay The default time delay is 90 seconds. The live delay is the interval between two live signal message attempts to the notification server. Valid entries are between 60 to 999 seconds. Select the mode Edit notify Mode...
-
Page 6: How To Program Notification Calls
Configuration documentation How to program notification calls Access to the configuration menu Password? Edit notify ..SYSTEM 1 SYSTEM 2 Lock to any Enter the handset Select one system administration code Activate the Notification call Edit notify Status Notify Notification calls are initiated by the user of the handset. -
Page 7: How To Program Key Event Calls
Select Access Edit notify Access1 Access2 Enter the prefix to access the trunk line or security personel set in fallback mode There is no default value and a maximum of four digits can be keyed in. Authorised digits are 0 to 9, * and #. -
Page 8: How To Program Status Calls
Configuration documentation Select the mode Edit notify Mode Enterprise Office The default mode is Enterprise. Select Access Edit notify Access1 Access2 Enter the prefix to access the trunk line or security personel set in fallback mode There is no default value and a maximum of four digits can be keyed in. Authorised digits are 0 to 9, * and #. - Page 9 Activate the Status call Edit notify Status Status Status calls are calls that are automatically made by the handset to the notification server. As status calls are made when the handset is put in the charger or removed from the charger, as well as before power off or after power on, this feature notifies the server whether the user can be reached or not.
-
Page 10: Communication Server Configuration
Communication Server configuration Other Introduction To support these enhanced features, ensure that the communication server has the appropriate settings. A basic checklist of the necessary settings follows. More detailed information is available in the Office Communications & OmniPCX Enterprise installation manuals, and in video presentations. - Page 11 Declaration of compliance howtoc We, Alcatel-Lucent Enterprise, declare that the products covered by this user guide are compliant with the primary requirements of the Parliament and Council Directive 1999/5/CE. This equipment uses the DECT harmonised frequency spectrum and can be used in all the countries of the European Community, Switzerland and Norway.No guarantee is given concerning possible...