Toshiba 32L255 Series Owner's Manual page 28

Activating the 4:3 Stretch
When 4:3 Stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press  or 
to select 4:3 Stretch.
2
Press  or  to select On or Off .
NOTE:
This feature is not available when Auto Format is set
to Off .
Activating Blue Screen
When Blue Screen is set to On, the screen will turn
blue and the sound will be muted when no signal is
received.
• The Blue Screen setting is not available for DTV
programmes.
1
From the PREFERENCES menu, press  or  to
until Blue Screen is selected.
2
Press  or  to select On or Off .
NOTE:
External inputs do not mute the sound.
Eco Mode
In Eco Mode, the screen becomes slightly darker and
you will be able to reduce power consumption.
NOTE:
This feature is not available when Picture Mode is set
to Intelligent AutoView.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Eco Mode and press 
or  to select On or Off .
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not operate
the control buttons on the remote control or on the
TV control panel.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Automatic Power
Down, press  or  to select On or Off , and
then press EXIT.
NOTE:
1 minute before switching to standby, a warning
message will appear.
28
32405055L2550_EN.indd 28 32405055L2550_EN.indd 28
Using the TV's features
Setting the No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
• Low signal strength of analog channel (no signal
detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the Energy Saving Settings menu, press
OK.
2
Press  or  to select No Signal Power Down
and press OK.
3
Press  or  to select the item you want to
change and press  or  to select On or Off .
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before
turning off .
Setting the Power Saving Indicator
You can display the current power saving status.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Power Saving Indicator
and press OK.
Power Saving Level is displayed.
• The closer it is to High, the more power is
being saved.
27/02/02 15:40:09 27/02/02 15:40:09