3
Press OK to display the breakdown menu.
Press or to select an item, then press or
to select the item as shown below.
ATV Manual Tuning
Position
1
B/G P
C
1
A
C
E
G
B
D
F
A. Position selection
B. System (Sound) ( - page 53)
C. Colour System ( - page 53)
P : PAL (factory set),S : SECAM,
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the colour system selection may have
malfunctioned, or sound system selection is
wrong. In such a case, select another colour
and/or sound system ( - page 53).
D. Position skip selection
Press or to turn the position skip option
on " 8 " or off " ( ". The position will then be
skipped when you select channels with P U
or P u . The " 8 " mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classifi cation.
F. Channel
The channel number on which a station is
being broadcast.
G. Channel search operation
Press to search up the band or to search
down the band.
Press or repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H. Manual Fine Tuning
Press or until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the or to turn the Signal Booster
On or Off .
32405055L2550_EN.indd 17
32405055L2550_EN.indd 17
Introduction / Getting started
0
On
I
J
H
J. Label
Station labels appear under the programme
position display each time you turn on the TV,
select a channel, or press
To change or create station labels:
1) Press or repeatedly to select a
character for the fi rst space, then press
or .
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a blank
space from the list of characters.
Press OK to store your settings.
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1
From the SETUP menu, press or to select
ATV Manual Tuning.
2
With the list of channels now showing, press
or to select the channel you want to move
and press .
ATV Manual Tuning
Pos.
Label
0
1
ABCD
2
EFGH
3
IJKL
MNOP
4
5
6
7
3
Use or to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4
Press to store your move.
• Repeat as necessary, and then press EXIT.
.
(blank space)
17
27/02/02 15:40:08
27/02/02 15:40:08