Clutch Cable - Suzuki RM-Z450L5 Set-Up Manual/Parts List

CLUTCH CABLE

Pass the clutch cable through the adjuster cover and
lever cover.
A: Clutch cable
B: Adjuster cover
C: Lever cover
Check the clutch cable end.
Align the clutch cable end with the recess of clutch
release arm.
A: Cable end
B: Recess (Clutch release arm)
Turn the clutch lever adjuster in as far as possible and
align the slots.
Insert the inner cable end into the recess in the clutch
lever, then pull on the outer cable housing and insert it
into the adjuster.
Do not adjust at this time.
Adjustment will be covered in the SERVICING section.
NOTE:
Before installing the cable, grease the cable end.
Install the lever cover and adjuster cover.
A: Clutch cable
B: Adjuster
C: Cable end
D: Adjuster cover
E: Lever cover
12