Suzuki RM-Z450L5 Set-Up Manual/Parts List page 14

ENGINE STOP SWITCH
Hook the holders on the grooves of the engine stop
switch.
NOTE:
Use the holder with an internal thread cutting at the
lower side.
A: Engine stop switch
B: Holder (Upper)
C: Holder (Lower)
D: Thread cutting
Install the engine stop switch to the left of handlebars.
A: Engine stop switch
B: 3 × 14 mm screw (with lock washer)
S-HAC SWITCH
Hook the holders on the grooves of the S-HAC switch.
NOTE:
Use the holder with an internal thread cutting at the
front side.
A: S-HAC switch
B: Holder (Front)
C: Holder (Rear)
D: Thread cutting
Install the S-HAC switch to the left of handlebars.
NOTE:
Align the matching mark on the handlebars with
mating surface of the S-HAC switch holder.
A: S-HAC switch
B: 4 × 14 mm screw (with lock washer)
C: Matching mark
13