FRONT
FRONT
FRONT
FRONT
FRONT
REAR
CLAMP
Clamp the engine stop switch wiring harness and
S-HAC switch wiring harness to the handlebars
with strap.
A: Strap L:100 mm
B: Strap L:130 mm
C: Engine stop switch wiring harness
D: S-HAC switch wiring harness
E: Handlebars
FRONT FENDER
Install the front fender with four sets of mounting parts
as shown.
A: Front fender
B: Collared spacer OD:25.0 mm ID:6.5 mm T:6.5 mm
Install the front fender to the front fork lower bracket.
A: Front fender
B: Collared spacer OD:25.0 mm ID:6.5 mm T:6.5 mm
C: Washer OD:28.0 mm ID:6.5 mm
D: 6 × 16 mm flange bolt
E: Front fork lower bracket
BRAKE DISC
To prevent brake squeaking and pad contamination,
carefully clean the front and rear brake disc plates with
alcohol or other non-petroleum based solvent.
This will remove the rust-preventive coating and dirt.
14