Squelch Off - Kenwood PKT-23 Instruction Manual

• Super Lock-P
• Power
• Volume Up/Down (if Volume Key (Key Lock) is unchecked)
• Channel Up/Down
■ Monitor
Press this key to deactivate QT or DQT signaling. Press the
key again to return to normal operation.
■ Scan
Press this key to turn the Scan function on and off.
Scan is useful for monitoring signals on the transceiver
channels. When scanning, the transceiver checks for a
signal on each channel and only stops if a signal is present.
If the QT/DQT matches, the transceiver stops at the channel
and opens the squelch so you can listen to the call. If the
QT/DQT does not match, the call is ignored and scanning
continues.

■ Squelch Off

Press this key to hear background noise. Press the key
again to return to normal operation.
■ Super Lock-P
Press and hold this key for 4 seconds to lock the transceiver
keys. Super Lock-P locks the transceiver keys to prevent
accidental operation. Turning the transceiver power OFF and
then ON again will not disable Super Lock-P. To deactivate
Super Lock-P, with the transceiver power OFF, press and
hold the PF-2 key while turning the transceiver power ON.
• When the LED lights yellow, release the PF-2 key.
• While Super Lock-P is activated, you can still perform the
following actions: PTT, Squelch Off, Monitor, Power, Volume.
21