Kenwood PKT-23 Instruction Manual page 11

3 When charging is complete, the
LED indicator turns off.
• It takes approximately 4 hours to
charge the battery pack.
Note:
◆ Use a USB cable shorter than 3 meters.
◆ We recommend using a short USB cable (low loss) for charging.
■ Charging with the KSC-44CR Charger
1 Plug the AC adapter cable into the jack
located on the bottom of the charger.
2 Plug the AC adapter into an AC outlet.
3 Slide a transceiver equipped with a battery
pack into the charging slot of the charger.
• Make sure the metal contacts of
the transceiver mate securely with
the charger terminals.
• The LED indicator lights blue.
4 When charging is complete, the
LED indicator turns off. Remove
the transceiver from the charging
slot of the charger.
• It takes approximately 4 hours to
charge the battery pack.
• Transmission is inhibited while
charging.
• When the charger will not be used
for a long time, unplug the AC
adapter from the AC outlet.
LED
Indicator
LED
Indicator
3