Chapter 5 Uefi Setup Utility; Introduction; Uefi Menu Bar - ASROCK Beebox Series Manual

Hide thumbs Also See for Beebox Series:
Table of Contents

Advertisement

Chapter 5 UEFI SETUP UTILITY

5.1 Introduction

his section explains how to use the UEFI SETUP UTILITY to conigure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
ater you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY ater
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system of
and then back on.
Because the UEFI sotware is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

5.1.1 UEFI Menu Bar

he top of the screen has a menu bar with the following selections:
Main
Advanced
Tool
H/W Monitor
Security
Boot
Exit
26
For setting system time/date information
For advanced system conigurations
Useful tools
Displays current hardware status
For security settings
For coniguring boot settings and boot priority
Exit the current screen or the UEFI Setup Utility

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents