Cleaning The Inside Of The Thread Guide - Janome MC8200QC Instruction Book

z
q
x
c
e
v
r
w

Cleaning the Inside of the Thread Guide

Clean the inside of the thread guide plate under the top
cover at least once a month.
z Remove the needle thread and remove the thread
guide plate by pulling it up.
q Thread guide plate
x Remove lint and dust from the brush on the underside
of the thread guide plate using a lint brush.
w Brush on the thread guide plate
c Clean the area around and under the pre-tension leaf
with the lint brush.
e Pre-tension leaf
v Set the thread guide plate on the machine, inserting
the tenons into the slots. Push the thread guide plate
down to snap it in place.
r Tenon
85