Round End And Fine Fabric Buttonholes; Keyhole Buttonhole; Stretch Buttonholes - Janome MC8200QC Instruction Book

q
e
q
q
e
q
q
e
q
w
r
w
r
w
w
r

Round End and Fine Fabric Buttonholes

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
The sewing procedure is the same as the square
buttonhole (refer to pages 45-47).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.
Keyhole Buttonholes
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
NOTE:
The buttonhole 27 is used for thick buttons on medium
weight fabrics.
The buttonhole 28 is used with thick buttons and
heavy fabrics.
The sewing procedure is the same as the square
buttonhole (refer to pages 45-47).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
q Starting point
w Eyelet puncher
NOTE:
The buttonhole width can be adjusted from 5.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.

Stretch Buttonholes

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
The sewing procedure is the same as the square
buttonhole (refer to pages 45-47).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 29 (MODE 1), 0.7 to 1.2 for pattern 30 (MODE
1) and 0.5 to 2.5 for pattern 31 (MODE 1). If the stitch
balance of the left and right row is not even, correct it
by turning the feed balancing dial (refer to page 83).
50
MODE 1: 24, 25
AUTO
Automatic buttonhole foot R
5
MODE 1: 26-28
AUTO
Automatic buttonhole foot R
5
MODE 1: 29-31
AUTO
Automatic buttonhole foot R
5