Table of Contents
Advertisement
152953 43/0en
30-08-2005
Operating instructions
Use of "3 in 1" combi detergents
These products are detergents with a combined cleaning, rinsing and
salt function.
1. Check whether these detergents are suitable for your water
hardness. Follow the manufacturers instructions.
2. Set the "3 in 1" function.
3. Before the start of the washing programme put the "3 in 1"
detergent in the detergent dispenser.
NOTE: If the drying results are not satisfactory we recommend that
you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser and set the rinse aid
dosage to position 2.
If you decide to turn back to the use of the standard detergent
system we advise that you:
Deactivate the "3 in 1" function.
Fill up the dispensers for salt and rinse aid again.
Adjust the water hardness setting to the highest setting perform
up to 3 normal washing programmes without loading any dishes.
Adjust the water hardness setting according to the hardness of the
water in your area.
Adjust the rinse aid dosage.
NOTE: When using 4 in 1 detergents that integrate also anti-glass
corrosion agent into "3 in 1" formula, please follow the same
instruction as given for "3 in 1" detergents above.
28
9:47
Pagina 28
Hide quick links:
Advertisement
Table of Contents
