AEG FAVORIT 65080 VIL Instruction Book page 10

152953 43/0en 30-08-2005
Operating instructions
Activation/deactivation of the 3 in 1 function
(The dishwasher must be switched off)
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator light
of the set programme button starts flashing.
After about 2 seconds the indicator lights of all the programme
selection buttons will illuminate, this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.
4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1 function" is active.
To deactivate the function press function button 4 again, the
indicator light turns off.
3 in 1 function active
3 in 1 function not active
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
10
9:47 Pagina 10
indicator light on
indicator light off