Link Operation Menu - Sharp Aquos LC-60LE644U Operation Manual

Using LINK Operation

Link Operation Menu

Show Start Menu
You can call up a setup menu from the connected LINK-
compatible equipment.
NOTE
Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be
displayed.
ENG 6-4
Change Audio Output Device
You can select to listen to the TV sound only from the
LINK-compatible audio system.
By AQUOS audio SP: The sound from the TV speaker is
muted and only the sound from the LINK-compatible
audio system is audible.
• You can use VOL+/- and MUTE.
By AQUOS SP: The sound is output from the TV speaker.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy chain, you
can specify which device to control here.
Press / to select the desired device from a list of
connected HDMI devices, and then press ENTER.
LINK Setup
You can also display the LINK Setup screen from the Link
Operation Menu.