10. STAND ALONE TEST
10. STAND ALONE TEST
10.1 Introduction
This manual explains how to examine the status of RX and TX of the model.
A. Tx Test
TX test - this is to see if the transmitter of the phones is activating normally.
B. Rx Test
RX test - this is to see if the receiver of the phones is activating normally.
10.2 Setting Method
1. Set COM Port
2. Check PC Baud Rate
3. Confirm EEPROM & Delta file prefix name, and then click "OK".
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. STAND ALONE TEST
Not Connected
144/158
- 15 -
10. STAND ALONE TEST
LGE Internal Use Only