Printing Multiple Copies; Printing A Fixed-Length Label; Serializing Your Labels - Dymo LabelPoint 350 User Manual

Printing Multiple Copies

You can print up to 16 copies of a label at one time.
When printing multiple copies, a dotted cut-line is
printed between each label.
To print multiple copies of the label
1. Press and then select Set # Copies.
2. Press the up arrow key to increase the number of
copies to print.
3. Press the down arrow key to begin decreasing the
number of copies from 16.
4. Press .
5. Press to begin printing.
G
When printing is finished, the number of copies to
print returns to the default value of 1.

Serializing Your Labels

You can print a series of labels with the last number
incremented by one number. The number of labels
serialized depends upon the number of copies you
selected to print. Only the last series of numbers that
follows any letter, space, or punctuation will be
serialized. For example, abc123 will print as abc123,
abc124, abc125; and 123-998 will print as 123-998,
123-999, 123-1000, and so on.
To serialize your labels
1. Enter the text for your label.
2. Select the number of labels to print as described in
Printing Multiple Copies on page 10.
3. Select + .
G

Printing a Fixed-Length Label

Normally, the length of the label is determined by the
length of the text entered. However, you may wish to
make a label for a specific purpose that is a fixed
length regardless of the length of the text.
10
You can specify a fixed length for a label in 2 mm (0.1")
increments between 40 mm (1.5") and 400 mm
(15.0"). The preset fixed length is 100 mm (4.0"). Any
change you make to the fixed-length setting remains
in effect until you change it.
To set the label length
1. Press + .
2. Select ON to turn on Fixed Length.
3. Press the up arrow to increase the length.
4. Press the down arrow to decrease the length.
5. Press to set the fixed length.
6. After you print the label, repeat step 1 and turn
Fixed Length OFF; otherwise, all your subsequent
labels will print with this fixed length.
Printing Barcode Labels
The labelmaker can print barcodes in six standard
formats: UPC A, UPC E, EAN8, EAN13, CODE-39, and
CODE-128. You can only print a barcode on 19 mm (3/
4") labels; and you can only print one barcode per
label.
The barcode prints horizontally along the label with
the text in small print underneath the barcode. You
can optionally add text before and after the barcode.
Or, you can add text above or below the barcode by
creating a two-line label. See Creating Multi-Line
Labels on page 6.
Four of the standard barcodes require a fixed number
of characters to generate the barcode: EAN-8, EAN-13,
UPC-A, and UPC-E. CODE-39 and CODE-128 barcodes
allow a variable number of characters to be entered.
To create a barcode
1. Press .
2. Select Set Barcode and press
3. Use the arrow keys to select the barcode type, and
press .
.