Create Directory Entries; Create A New Directory Entry - AT&T CRL82112 User Manual

Directory

Create directory entries

Create a new directory entry

1. Press MENU/
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
4. Press /SELECT.
MENU
5. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
• Press q
CID
or right.
• Press
MUTE/
• Press and hold
• Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
then q or p
CID
locate the number. Press
/SELECT to move on to the name.
6. Press
MENU
The display shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
Press q
•
CID
or right.
Press 0 to add a space.
•
• Press
MUTE/
• Press and hold
8. Press /SELECT to store your new directory entry. There is a
MENU
confirmation tone and the screen shows Saved. To change the entry later,
see page 33.
NOTE: The first letter of every word is a capital letter. The remaining letters
in a word start as lower case letters as shown in the chart on the next page.
in idle mode to enter the main menu.
SELECT
to scroll to >Directory, then press
DIR
to highlight >Add contact.
DIR
or p to move the cursor to the left
DIR
DELETE to erase a digit.
DELETE to erase all digits.
MUTE/
/PAUSE to enter a 3-second
REDIAL
, or pressing REDIAL/
DIR
MENU
or p
to move the cursor to the left
DIR
DELETE to erase a character.
DELETE to erase all characters.
MUTE/
PAUSE
/SELECT to copy the number.
30
Answering sys
>Directory
Review
>Add contact
ENTER NUMBER
PAUSE
repeatedly to
ENTER NAME
Robert Brown_
888-883-2445 _
Saved