Setting the Devices
Registering a Printer
Use EPSON TMNet WebConfig to register a network printer on this product, following the
procedures below. This product's printer is already registered, so settings are not necessary.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Printer].
The "Printer" screen is displayed.
98
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT's IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".