Sony SLV-ED939ME Operating Instructions Manual page 58

Connecting to a VCR or stereo system (continued)
Example C (SLV-ED939ME/SG only)
TV
Other VCR (Player)
LINE OUT
Audio/video cable (not supplied)
: Signal flow
How to connect to a stereo system (SLV-ED939ME/SG
only)
Connect the LINE-2 IN jacks on this VCR to the audio output jacks on the
stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• When you connect another VCR to the LINE-2 IN* connector, press INPUT
SELECT to display "L2" in the display window.
* SLV-ED939ME/SG only
Editing
58
Your VCR (Recorder)
LINE IN 1
SLV-ED939ME/SG 3-082-203-11 (1) GB ME/SG