Miele DG 6300 Operating And Installation Instructions page 114

Disconnecting from the mains

Danger of electrical shock.
After disconnection, ensure the ap‐
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol‐
lowing depending on installation:
 Completely remove fuses
Automatic circuit breakers
 Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers type B or C:
 Switch the on/off switch from 1 (on)
to 0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
114
Replacing the mains connec‐
tion cable
If the mains cable needs to be replaced
it must be replaced with a special con‐
nection cable, type H 05 VV-F (PVC-in‐
sulated), available from Miele.