Alarm Output - Honeywell HISD-2201WE-IR Operation Manual

Honeywell
Figure 3-24
Alarm Input: Select the alarm input number
Alarm In Name: Input alarm input name
Trigger: Select the alarm statue: Normal Open/ Normal Close
Alarm Schedule: Alarm schedule can be set from Monday to Sunday
Email: Click Email, then it will send Email to appointed mailbox when alarm triggered
Snap: Click Snap, snapshot the current image picture when alarm triggered
Record: Click, it will do video record automatically when alarm triggered
Alarm Output: There is a warner connect the alarm output port, alarm triggered the embedded relay switch to make alarm output.
Snap count: Set the snapshot count in every second
Snap Interval: Set the snapshot interval time
Enable PTZ: Click Enable PTZ, it will linkage PTZ operation when alarm input
Preset: set the linkage preset point
After all parameters setting completed, click "Save" and the it comes into effect immediately.

Alarm Output

IP Camera "Alarm Output" setting interface as figure 3-25.
21