Hardware Installation; System Requirement; Installation Environment; Installation Environment Requirements - Honeywell HISD-2201WE-IR Operation Manual

2 Hardware Installation

System requirement

•
LAN or WAN Internet to connect server, via PC Ethernet ( network card or network cable) TCP/IP protocol （Windows
/NT/2000/XP) connect , suggest Internet Explorer 5.0 version or later.
•
Monitor and PC configuration:
CPU: PⅢ or latter, RAM: 512M or latter( Above DirectX8.1)
•
Monitor: 17",1024×768 resolution
•
Operation system: Windows NT, Windows2000, Windows XP

Installation environment

Installation environment requirements

Far away from high-temperature resource and environment; improper place for ventilation; avoid install on shaky place.

Recommend operating environment

HISD-2201WE
Indoor:-10 ~ 50℃
Outdoor: -30°C～60°C
HISD-2201WE-IR
Indoor:-30 ~ 60℃

Hardware installation steps

Please make sure LAN and WAN are working order before installation of the IP camera . After checked all the network system in good
condition, keep your hands clean and dry, following the steps bellow.
•
Unpack the box to check the goods
•
Take out all goods which needed for installation from the box
•
Take off the protection cover and insert the SD card. Please refer to the SD card installation steps below.
Figure 2 1 HISD-2201WE
Honeywell
Take off the protection
cover
2