Network Connection; Connection Instruction - Honeywell HISD-2201WE-IR Operation Manual

•
Make sure to turn off all the power when install the camera
•
Please confirm the power transformer, avoid the device damage with unmatched power source

Network connection

•
LAN connection
Use one network line to connect IP camera with concentrator or switchboard of the LAN.
•
WAN connection
Use one network line to connect IP camera with Router or XDSL Modem/Cable Modem. as shown bellow.
•
Connect the power supply
After connect the power source, the network camera will start operation automatically.

Connection instruction

2 channels Alarm
input
Analog video output
Power supply input
RJ45
Alarm output, 485 A/B port
Audio input
Audio output
Honeywell
5