Failed Hard Drive Member; Power Off - MSI H170M PRO-DH User Manual

3. Reboot to Windows

Failed Hard Drive Member

1.

Power off.

2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter.
RAID Volumes :
None defined.
Physical Devices :
Port Device Model
1
2
5. Exit IRST Option ROM, reboot to Windows
6. When prompted to rebuild the RAID volume, click Yes.
7. The Intel
®
the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be
launched which will guide you through the process of rebuilding to the new hard
drive.
74
RAID Configuration (optional)
; the rebuild will occur automatically.
®
1. Create RAID Volume
[ DEGRADED VOLUME DETECTED
2. Delete RAID Volume
"Degraded" volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
[ DISK / VOLUME INFORMATION
Select the port of the destination disk for rebuilding (ESC to exit):
Port Drive Model
1 XXXX-XXXXXXXX
Serial #
XXXX-XXXXXXXX XXXXXXXXXXXXXX
[ ↑↓] - Previous/ Next
XXXX-XXXXXXXX XXXXXXXXXXXXXX
[ ↑↓] - Select
Rapid Storage Technology application will be launched. Right-click
[ MAIN MENU ]
4. Recovery Volume Options
]
4. Recovery Volume Options
5. Exit
]
Serial #
XXXXXXXXXXXXXX
Size Type/Status (Vol ID)
XXX.XGB
[ENTER] - Select [ESC] - Exit
XXX.XGB
[ESC] - Exit [ENTER] - Select Menu
.
®
Size
XXX.XGB
Non-RAID Disk
Non-RAID Disk