Threading The Console Cable Assembly (P80) - Precor EFX 883 Assembling And Maintaining Manual

38
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 813
Threading the Console Cable Assembly
(P80)
Earlier in the installation, you threaded the necessary cables
through the frame of the base unit and out the passthrough
opening in the console mount. As you line up the back plate
on the console with the console mount, you must make sure
that the console cable assembly passes correctly through the
openings in both components.
Important: Before you begin the following procedure, remove the
rear cover from the control console. To remove the cover, use your
fingernails to pry the lower edge loose, then swing the cover up
and out as shown in the following illustration.
Figure 22: Removing the access cover from the P80 console