Assembling the EFX
Installation Requirements
Prior to assembly, make sure you have the required tools and
hardware.
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners
Flat washers (⁵₁₆-inch)
Split washers (⁵₁₆-inch)
Flat head hex drive screws
(¹₄-inch x ⁵₈-inch)
Phillips-head machine screws
(#8 x ³₄-inch)
Buttonhead screws
(⁵₁₆–inch x 1–inch)
Sockethead cap screws
(#8 x 1¹₂-inch)
Self-tapping screws
(#8 x 1¹₂-inch)
Handlebar bolt wrench
19
Quantity
14
14
4
3
14
4
4
1