Leveling The Efx - Precor EFX 883 Assembling And Maintaining Manual

Assembling the EFX

Leveling the EFX

Make sure the unit is level before allowing anyone to use it.
CAUTION: To eliminate movement, make sure the adjustable feet
are in contact with the floor.
To level the unit:
1.
2. Correct the height of each adjustable foot as follows.
Important: Place the unit on a flat surface. Rotating the
adjustable feet cannot compensate for extremely uneven surfaces.
When you are finished adjusting the unit, place the unit on the
floor and recheck that it is level.
Gently rock the unit. If there is any movement, ask your
assistant to tip the unit to one side while you locate the
adjustable feet.
If you want to ...
Raise the unit
Lower the unit
Figure 21: Rubber pad and adjustable foot locations
Then turn the adjustable feet ...
Counterclockwise
Clockwise
35