Sony VPL-X2000E Operating Instructions Manual page 53

Lcd data projector
Hide thumbs Also See for VPL-X2000E:
Table of Contents

Advertisement

Available languages

Available languages

VD: Vertical sync: 0.6–8 Vp-p,
high impedance, sync positive/
negative
AUDIO IN: Phono type (stereo)
500 m Vrms, impedance more
than 47 kilohms
HDTV (Y/P
Y: 1 Vp-p ± 2dB positive,
75 ohms
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
P
/P
B
75 ohms
HDTV (GBR): BNC type
G with sync: 1 Vp-p ± 2 dB,
75 ohms
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ± 2dB positive,
75 ohms
AUDIO OUT (variable out)
Phono type, Max. 1 Vrms
When input is 500 mVrms:
impedance less than 5 kilohms
Safety regulations
VPL-X2000U: UL1950, c-UL
(CSA No. 950), FCC Class A, IC
Class A
VPL-X2000E/X2000M: EN60 950
(TÜV), CE, C-Tick
General
562 × 237 × 649 mm (22
Dimensions
× 25
Mass
Approx. 34.5 kg (76 lb 1 oz)
(excluding the optional lens)
Power requirements
VPL-X2000U: AC 100 to 120 V/
220 to 240 V, 50/60 Hz
VPL-X2000E/X2000M: AC 220 to
240 V, 50/60 Hz
Power consumption
Approx. 770 W (Standby mode: 15W
for VPL-X2000U, 20 W for VPL-
X2000E/X2000M)
Heat dissipation
2628 BTU
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
35% to 85% (no condensation)
..........................................................................................................................................................................................................
1) UL listed for 120 V operation.
/P
): BNC type
B
R
: 0.35 Vp-p ± 2dB positive,
R
× 9
1
3
/
4
5
/
inches) (w/h/d)
8
1)
Storage temperature
Storage humidity 10% to 90%
Supplied Accessories
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-Q2000 (for replacement)
Interface Board
IFB-12A (Analog RGB/component/HDTV/
composite video/S video input with 5BNC type
connectors)
IFB-20 (Analog RGB input with D-sub 9-pin type
connector)
IFB-21 (Analog RGB input/output with HD D-sub
15-pin type connector)
IFB-30 (Digital RGB input with D-sub 9-pin type
connector)
IFB-50 (serial digital video input/output with BNC
type connector)
/
IFB-1000 (Composite video input with BNC type
8
connector/S video input with mini DIN 4-pin
type connector)
IFB-X2000E (Composite video input with phono
jacks/S video input with mini DIN 4-pin type
connector) (only for VPL-X2000E)
Signal Interface Switcher PC-3000
Interface Unit IFU-1271/1271M
SIC Cable
SIC-10/20A/20C/21/22/23/24/24A/25/26/26A/30/
31/M1/M5/M15/M25/M50
9-pin remote cable (for PJ COM)
RCC-5G/10G/30G
–20°C to +60°C (–4°F to +140°F)
Remote Commander RM-PJ1001 (1)
Size AA (R6) batteries (3)
Remote commander cable (stereo)
(15 m) (1)
AC power cord (1)
Terminator for the PJ COM
connector (1)
Lens ring (1)
Operating Instructions (1)
Installation Manual for Dealers (1)
Warranty (only for VPL-X2000U)
(1)
(continued)
53
(GB)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-x2000m

Table of Contents