ENGINE WILL NOT START
Possible Cause
Clip not inserted in emergency stop switch.
Gearshift lever or control lever not in neutral position.
Choke OFF (tiller handle and manual choke type).
Throttle grip not in START position
(tiller handle type).
Fast idle lever raised (remote control/side-mount type).
TAKING CARE OF UNEXPECTED PROBLEMS
Insert clip in emergency stop switch.
Shift to neutral (p. 50 or 52).
Pull choke knob to ON position, unless engine is warm
(p. 50).
Turn throttle grip to START position (p. 50).
Leave fast idle lever OFF, if the engine is warm (p. 53).
Correction
101