Table of Contents
Advertisement
•
When starting to drill, run the engine at full
throttle.
BEFORE DRILLING, BE SURE TO READ AND
UNDERSTAND THE ENTIRE OPERATOR'S
MANUAL TO AVOID THE CHANCE OF SERIOUS
INJURY.
•
Do not force the drills and only move as quickly
as the drills will allow.
•
Stop the engine and disconnect from ignition
cable before: - cleaning or when clearing a
blockage; checking, maintenance or working
on the machine.
•
Handle fuel with care; it is highly fl ammable.
Never add fuel to a machine with a running or
hot engine.
OPERATING TECHNIQUES
WARNING
•
Do not attempt to repair the machine unless
you are qualifi ed to do so.
•
Do not operate the machine with a damaged or
excessively worn drill bit.
•
Always ensure all handles and guards are fi tted
when using the machine. Never attempt to use
an incomplete machine or one fi tted with an
unauthorized modifi cation.
•
When transporting or storing the machine
always remove the drill bit.
•
To reduce fi re hazard keep engine and silencer
free of debris, leaves or excessive grease.
•
Handle drill with care, contacting with drills may
cause injury.
5
Advertisement
Table of Contents
