•
When starting to drill, run the engine at full
throttle.
WARNING
BEFORE DRILLING, BE SURE TO READ
AND UNDERSTAND THE ENTIRE
OPERATOR'S MANUAL TO AVOID THE
CHANCE OF SERIOUS INJURY.
•
Do not force the drills and only move as
quickly as the drills will allow.
•
Stop the engine and disconnect from
ignition cable before: - cleaning or when
clearing a blockage; checking, maintenance
or working on the machine.
•
Handle fuel with care; it is highly
flammable. Never add fuel to a machine
with a running or hot engine.
•
Do not attempt to repair the machine unless
you are qualified to do so.
•
Do not operate the machine with a
damaged or excessively worn cutting
device.
•
Always ensure all handles and guards are
fitted when using the machine. Never
attempt to use an incomplete machine or
one fitted with an unauthorised
modification.
OPERATING TECHNIQUES
DANGER
•
When transporting or storing the machine
always remove the drill.
•
To reduce fire hazard keep engine and
silencer free of debris, leaves or excessive
grease.
•
Handle drill with care, contacting with drills
may cause injury.
5