Husqvarna 305 Operator's Manual page 62

305_308,EN.book Page 62 Saturday, November 8, 2014 12:33 PM
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the robotic lawnmower.
Never use solvents for cleaning.
IMPORTANT INFORMATION
Working with dull blades gives a poorer
mowing result. The grass is not cut cleanly and
more energy is needed resulting in the robotic
lawnmower not mowing such a large area.
Chassis and blade disc
1. Set the main switch in position 0.
2. Wear protective gloves.
3. Lift the robotic lawnmower onto its side.
4. Clean the blade disc and chassis using e.g. a
dish brush.
At the same time, check that the blade disc
rotates freely in relation to the foot guard.
If long blades of grass or other objects find their
way in, these may impede the blade disc. Even
a slight braking effect leads to a higher
consumption of energy and longer mowing
times, and at the worst will prevent the mower
from being able to mow a large lawn. The blade
disk must be removed to carry out a more
thorough cleaning. If necessary, contact your
dealer.
Chassis
Clean the underside of the chassis. Brush or wipe
with a damp cloth.
Wheels
Clean around the front wheels and rear wheel as well
as the rear wheel bracket.
Body
Use a damp, soft sponge or cloth to clean the body. If
the body is very dirty it may be necessary to use a
soap solution or washing-up liquid.
Charging station
Clean the charging station regularly from grass,
leaves, twigs and other objects that may impede
docking.
62 - English
8. MAINTENANCE
3018-062
3012-1023
3012-272
3012-973
3012-974