Time & Date Setting / Time & Date Display; Drawer Open Test - Casio SE-S100 Service Manual

[11] Time & Date Setting / Time & Date Display
[Function]
Allows you to check or change the time (hour, minutes, seconds) and date (year, month, day) that are
currently set.
* The time and date are not displayed on the customer display.
<11-1. Time & Date Setting>
[Operation]
Time setting command :
hh Hour
• The new settings are printed out when the it is complete.
Date setting command :
yy Year
• The new settings are printed out when the it is complete.
<12-2. Time & Date Display>
Command : 0 7 0 or 1 7 0 o
• To end the display, press y .
[Display of the result]
Date

[12] Drawer Open Test

[Function]
Tests whether drawers operate correctly. The drawer sensor checks every two seconds while the
drawer open test is performed infi nite times. Only when the drawer is closed, the drawer is reopened.
[Operation]
0 9 1 o
n
Command :
n: Number of times to run
0 Once (can be omitted)
Infi nite loop (to forcibly terminate the test, press y .)
1 to 9
[Printout of the result]
DRW
DRW
END
h m m s s
h
mm Minutes
y y m m d
d
mm Month
Time
n091
OK
n091
– 30 –
SE-S100 / PCR-T285 / PCR-T295
0 0 7 0 o
ss Seconds
0 1 7 0 o
dd Day