Sd Card Test (Write / Read, Report) - Casio SE-S100 Service Manual

[6] SD Card Test (write / read, report)

<6-1. SD Card Write/Read Test>
[Function]
Writes the text fi le for the test (test.txt) on the SD card and tests whether the written fi le can be read.
[Important]
• Use an SD card formatted as FAT32.
• Insert the SD card before the starting test.
• The test result shows "NG" if you use a write-protected SD card.
• The text fi le written during the test (test.txt) will not be erased.
• If the SD card contains a fi le with the same name (test.txt), delete "text.txt" fi le fi rst before
performing the SD card check.
[Operation]
0 1 4 o
n
Command :
n: Number of times to run
0 Once (can be omitted)
Infi nite loop (to forcibly terminate the test, press y .)
1 to 9
[Printout of the result]
RAC
SD WR OK
END
<6-2. SD Card Report>
[Function]
Prints out the memory size of the SD card and its write-protection status.
[Operation]
6 1 4 o
n
Command :
n: Number of times to run
0 Once (can be omitted)
Infi nite loop (to forcibly terminate the test, press y .)
1 to 9
[Printout of the result]
RAC
Size = XXXX MB
WriteProtect = OFF
SD SIZE
END
n014
n014
614
OK
614
– 26 –
SE-S100 / PCR-T285 / PCR-T295